Dorian Specifications

• Frequency range: 10Hz - 50kHz
• Cantilever system: Boron rod cantilever, natural diamond
• Namiki MicroRidge line-contact stylus (2.5 x 75 micrometers profile)
• Channel separation: 30dB or better at 1kHz
• Namiki MicroRidge line-contact stylus (2.5 x 75 micrometers profile)
• Channel separation: 30dB or better at 1kHz
• Internal impedance: 9.5 ohms
• Output voltage: 0.6mV (5.0cm/sec., zero to peak, 45 degrees)
• Cartridge weight (without stylus cover): 6.4g
• Compliance: Approx. 12 x 10-6 cm/dyne at 100Hz
• Centerline through mounting holes to stylus tip: 9.5 mm
• Recommended tracking force: 1.8 - 2.0g
• Recommended impedance: 100 ohms to 47 kohms

Dorian Mono Specifications

• Frequency range: 10Hz - 50kHz
• Cantilever system: Boron cantilever, Namiki MicroRidge
• line-contact stylus (2.5 x 75 micrometers profile)
• Internal impedance: 3.0 ohms
• Output voltage: 0.25 mV (5.0cm/sec. RMS, horizontal movement, 1kHz)
• Cartridge weight (without stylus cover): 6.4g
• Compliance: approx. 12 x 10-6 cm/dyne at 100Hz
• Centerline through mounting holes to stylus tip: 9.5 mm
• Recommended tracking force: 1.8 - 2.0g
• Recommended impedance: 100 ohms to 47 kohms

Argo i Specifications

• Frequency range: 10Hz - 50kHz
• Cantilever system: Boron rod cantilever, and natural diamond, Ogura-manufactured, Lyra original line-contact stylus (3 x 70 micrometers profile)
• Channel separation: 30dB or better at 1kHz
• Internal impedance: 4 ohms
  
• Output voltage: 0.45 mV (5.0cm/sec., zero to peak, 45 degrees)
• Cartridge weight (without stylus cover): 6.4g
• Compliance: Approx. 12 x 10-6 cm/dyne at 100Hz
• Centerline through mounting holes to stylus tip: 9.5 mm
• Recommended tracking force: 1.7 - 1.8 g
• Recommended impedance: 100 ohms to 47 kohms

Helicon Specifications

• Frequency range: 10Hz - 50 kHz
• Cantilever system: Boron rod cantilever, Ogura-manufactured,
  
• LYRA original line-contact stylus (3 x 70 micrometers profile)
  
• Channel separation: 35 dB or better at 1kHz
  
• Internal impedance: 5.5 ohms
  
• Output voltage: 0.5 mV (5.0cm/sec., zero to peak, 45 degrees)
  
• Cartridge weight (without stylus cover): 8.3 g
  
• Compliance: Approx. 12 x 10-6 cm/dyne at 100Hz
  
• Centerline through mounting holes to stylus tip: 7.8 mm
  
• Recommended tracking force: 1.6 - 1.75 g
  
• Recommended impedance: 100 ohms to 47 kohms

Helicon Mono Specifications

• Frequency range: 10Hz - 50 kHz
  
• Cantilever system: Boron rod cantilever, Ogura-manufactured,
  
• LYRA original line-contact stylus (3 x 70 micrometers profile)
  
• Channel Separation: N/A
  
• Internal impedance: 3.0 ohms
  
• Output voltage: 0.25 mV (5.0cm/sec. RMS, horizontal movement, 1kHz)
  
• Cartridge weight (without stylus cover): 8.3 g
  
• Compliance: Approx. 12 x 10-6 cm/dyne at 100Hz
  
• Centerline through mounting holes to stylus tip: 7.8 mm
  
• Recommended tracking force: 1.6 - 1.75 g
  
• Recommended impedance: 100 ohms to 47 kohms

Helikon SL Specifications

• Frequency range: 10Hz - 50kHz
• Cantilever system: Boron rod cantilever, Ogura-manufactured
  
• LYRA original line-contact stylus (3 x 70 micrometers profile)
  
• Channel separation: 35 dB or better at 1kHz
  
• Internal impedance: 3 ohms
  
• Output voltage: 0.22 mV (5.0 cm/sec., zero to peak, 45 degrees)
  
• Cartridge weight (without stylus cover): 8.3 g
  
• Compliance: Approx. 12 x 10-6 cm/dyne at 100Hz
  
• Centerline through mounting holes to stylus tip: 7.8 mm
  
• Recommended tracking force: 1.6 - 1.75 g
  
• Recommended impedance: 100 ohms to 47 kohms

Skala Specifications

• Frequency range: 10 Hz - 50 kHz
  
• Cantilever system: Boron rod cantilever, and natural diamond, Ogura-
• manufactured, LYRA original line-contact stylus (3 x 70 micrometers profile).
  
• Channel separation: 35 dB or better at 1kHz
  
• Internal impedance: 5.5 ohms
  
• Output voltage: 0.5 mV (5.0cm/sec., zero to peak, 45 degrees)
  
• Cartridge weight (without stylus cover): 9 g
  
• Compliance: Approx. 12 x 10-6 cm/dyne at 100Hz
  
• Centerline through mounting holes to stylus tip: 9.5 mm
  
• Recommended tracking force: 1.6 - 1.75 g
  
• Recommended impedance: 100 ohms to 47 kohm

Titan i Specifications

• Frequency range: 10 Hz - 50 kHz
  
• Cantilever system: Diamond coated boron rod cantilever, and natural diamond,
• Ogura-manufactured, LYRA original line-contact stylus (3 x 70 micrometers
• profile).
  
• Channel separation: 35 dB or better at 1kHz
  
• Internal impedance: 5.5 ohms
  
• Output voltage: 0.5 mV (5.0cm/sec., zero to peak, 45 degrees)
  
• Cartridge weight (without stylus cover): 10.5 g
  
• Compliance: Approx. 12 x 10-6 cm/dyne at 100Hz
  
• Centerline through mounting holes to stylus tip: 9.5 mm
  
• Recommended tracking force: 1.6 - 1.75 g

Titan Mono

Our Titan Mono is a low-impedance moving coil cartridge that has been designed specifically to play monaural LP records in ultimate fidelity. It is our attempt to create the very best in breed, and in one magazine article was described as the "King of Mono".

Much great music is available only as monaural recordings, and these outstanding performances are clearly deserving of top-quality playback. Also, many of the cutting lathes used to master monaural LPs were capable of a wider frequency response and a greater dynamic range than stereo lathes. In some ways, therefore, monaural LPs can benefit more from quality reproduction techniques than stereo LPs.

Two totally separate monaural coils are used in the Titan Mono, since most monaural cartridges are used with stereo amplifiers and stereo speakers. The separate coils also help avoid possible ground loops and hum problems that could otherwise be caused if a single coil is fed into a stereo two-channel amplification system, thereby tying the two channels together electrically

Titan Mono

• Frequency range: 10 Hz - 50 kHz
  
• Cantilever system: Diamond coated boron rod cantilever, and natural diamond,
• Ogura-manufactured, LYRA original line-contact stylus (3 x 70 micrometers profile).
  
• Channel separation: 35 dB or better at 1kHz
  
• Internal impedance: 5.5 ohms
  
• Output voltage: 0.3 mV (5.0cm/sec., zero to peak, 45 degrees)
  
• Cartridge weight (without stylus cover): 13.5 g
  
• Compliance: Approx. 12 x 10-6 cm/dyne at 100Hz
  
• Distance from centerline through mounting holes to stylus tip: 9.5 mm
  
• Recommended tracking force: 1.6 - 1.75 g
  
• Recommended impedance: 100 ohms to 47 kohms